Converters Avantaz MB-PRS02GR-XX,TP-HAP-HGR, etc.

Converters of alternating, direct current into a unified signal. The device is designed to normalize (bring) the input signal level to unified signals (0-20,4-20 Ma) or (0-5,0-10V).

Converters of alternating, direct current into a unified signal. Technical specifications.

Converter-splitter of unified signals with galvanic isolation MB-PRS02GR-XX. The modular unit is designed for repetition, conversion, branching of unified signals 0-20mA, 4-20mA, 0-5V, 0-10V with galvanic separation of the supply voltage, input and output signals.

MB-PRS02GR-XX. Technical specifications.

Current repeater with active output, passive input TP-2AP-2GR,TP-4AP-4GR. NEW! Designed to provide galvanic isolation of 4-20mA analog sensor signals and control the presence of an output signal, no power required, 2-wire circuit.

TP-2AP-2GR,TP-4AP-4GR. Technical specifications.

Current converter TRP 1-2GRP. NEW! The device is designed to connect a sensor having a normalized signal of 4-20 mA according to a 2- or 3-wire circuit, providing galvanic isolation, to two recording devices. The output signal of the “passive type“ of a 2-wire connection.

TRP 1-2GRP. Technical specifications.

The current splitter converter TRP-1-2GRI is designed for matching (connecting) a sensor having a normalized output signal of 0-20 (4-20)mA to two devices with a passive (resistive) input with a load capacity of up to 500 ohms

TRP-1-2GRI. Technical specifications.

TRP-1-2GRUI - current splitter converter is designed for repetition, branching of unified signals, and input signals can be set by the customer in the ranges 0-100mA, 0-100V DC, output signals are linearly reduced to the ranges 0-20mA or 0-10V.

TRP-1-2GRUI. Technical specifications.

Current splitter TRP-1-1A/1P-GR 220VAC. NEW! The device is designed for interfacing, providing galvanic isolation of control and measuring equipment with devices with a unified output signal of 4-20 mA. according to a 2-wire scheme, its branching into two signals is 4-20 Ma, one passive, the second active.

TRP-1-1A/1P-GR 220VAC. Technical specifications.

Current splitter repeater signal TRP-1-2GR 220 AC. NEW! The device is designed for interfacing, providing galvanic isolation of control and measuring equipment with devices with unified output signals of 0-20(4-20)mA and branching this signal into 2 identical 0-20(4-20)mA. Power supply 220 AC.

TRP-1-2GR 220 AC. Technical specifications.

Current splitter converter TRP-1-4- X 220V AC. NEW! The device is designed for interfacing control and measuring equipment and devices with a unified analog signal 0-20-(4-20)mA, branching this signal into 4 identical ones for the modification of the TRP-1-4-1 (220V AC) and converting 0-20 mA to 4-20 mA for TRP modification-1-4-2 (220V AC). The sensor connection is implemented for both 3-wire and 2-wire circuits.The device is powered by 220V AC.

TRP-1-4- X 220V AC. Technical specifications.

TRP-1-4GR(01-12). Converters – splitters of unified signals are designed to connect sensors with output signals 0-20(4-20)mA 2- or 3-wire circuit, or signals 0-5(0-10) V with subsequent duplication or conversion and branching into 4 identical signals.

TRP-1-4GR(01-12). Technical specifications.

Current splitter (multiplier) of signals-converter (TRP). Designed for branching the unified signal 0..20(4..20mA) for 2 or 4 identical ones, with or without galvanic isolation, amplification of the output signal, the possibility of conversion. Visual control of the input signal by a line of LEDs.

Current splitter (multiplier) of signals-converter (TRP). Technical specifications.

Current splitter repeater TRP-4P-4GR, TRP-2P-2GR. Designed to duplicate (repeat) the input signal 4..20mA with galvanic isolation. Control of connection of input and output circuits. The presence of a 2- or 4-channel version. No power is required.

TRP-4P-4GR, TRP-2P-2GR. Technical specifications.

Voltage converter PN-GR-X. They are designed to convert discrete signals ≈220V (presence, absence) into output signals constant S.K., or 12V, or 24V, discrete (100 Hz) S.K., or =12V, or 24V, depending on the order. No power is required.

MON-GR-X. Technical specifications.

Switch-on delay device (CV). The switch-on delay device is designed to regulate the turn-on sequence of electricity consumers in order to reduce the starting current and reduce loads on electrical transformer substations.

UZV. Technical characteristics.

The current loop indicator TRP-1I is designed to convert a 4-20 mA signal into a visualized format, to monitor the level of the flowing signal

TRP-1I. Technical specifications.

Questionnaire